Donati DMK Chain Hoist

Generally used to lift an unguided load by means of a hook or handling accessories suitable for the purpose.

The DMK chain hoist from Donati available in FIVE configuration:

Electric Chain Hoist in Fixed Execution
  • Sold with eyebolt suspension
  • More than 150 standard executions - 1 or 2 lifting speeds
  • Capacities from 125 up to 4000 kg.
  • FEM (ISO): 2M (M5)
  • Standard hook runs 3 m. (different lengths on request)
  • High-strength steel rod chain 80kg/mm²
  • Noise level less than 85 dB (A)
  • Epicyclic crown wheel reduction gear and self-braking electrical motor with conical brake that ensures efficient braking action.
  • Motor protection IP55, insulation class “F”
  • Supply voltage: 400V- 3 phase - 50 Hz.
  • Low voltage controls 48V
  • Single chain fall (up to 2000 kg) with clutch device, dual chain falls (up to 4000 kg) with electromechanical overload device and raise/lower limit switches
Electric Chain Hoist with Hand-Push
  • Horizontal movement by push/pulling the load
  • Recommended for light duty and short load travel only
  • The push trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti-tilt derailment bars and equipped with shock absorbing buffers.
  • Capacities from 125 up to 4000 kg
  • FEM (ISO): 2M (M5)
  • Working at one or two lifting speeds
  • Other characteristics as per DMK in fixed execution
Electric Chain Hoist with Electric Trolley
  • Movement operated by the push button panel fitted on the hoist
  • Recommended when manual load pushing is not feasible and for heavy duty use.
  • The electric trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti-tilt derailment bars to prevent drop or derailing, and equipped with shock absorbing buffers.
  • The trolley can be supplied at:
    • 1 speed - 11 or 22 m/min
    • 2 speeds - 7/22 m/min
  • Electric limit switches to limit the horizontal travel of the electric trolley on the beam
  • Suitable for rectilinear monorails; with special devices it can runs on curves (minimum internal radius on the technical catalogue)
  • Capacities from 125 up to 4000 kg
  • FEM (ISO): 2M (M5)
  • Other characteristics as per DMK in fixed execution
Electric Chain Hoist with Electric Trolley- Low Headroom Execution
  • The best solution to get the maximum hook-run; fitted on a frame with a return system for the chain, the frame is mounted on 2 trolleys.
  • Available in electric or hand-push execution
  • Capacities from 125 up to 4000 kg
  • FEM (ISO): 2M (M5)
  • Lifting and travelling at 1 or 2 speed
  • Other characteristics as per DMK in fixed execution
Electric Chain Hoist- Climbing Execution
  • Allows the reaching of the installation point with the hook and the related chain, without having to lift the entire weight of the hoist.
  • It is particularly suited to the entertainment industry and when frequent installation and dismantling at greater heights are requested.
  • Capacities from 125 up to 2000kg
  • FEM (ISO): 2M (M5)
  • Lifting speed: 4 or 8 m/min
  • Chain box in cloth
  • Other characteristics as per DMK in fixed execution
MODEL :

Donati DMK Chain Hoist

Similar Products+
MODEL :

Donati DMK Chain Hoist

Similar Products+
Click to view >>